Showing posts with label brooms history. Show all posts
Showing posts with label brooms history. Show all posts

Thursday, 25 July 2013

About the Broom Man





 
Warren Olney was born and raised in Pasadena, California, at a time when orange blossoms instead of smog, permeated the air and life was quite different than the Pasadena of today. After graduating from Pasadena High School, Warren was accepted into the University of Idaho at Moscow, where he majored in Forest Management. Following his graduation from the university, he was employed by the United State's Forest Service. His first assignment being on the Gifford Pinchot National Forest working in forest and recreation management.

He went on to the Willamette National Forest where he was kept busy managing Winter sports activities, recreation and wilderness management.

On the Mount Hood National Forest, he was instrumental in master planning, management and administration of Timberline Lodge. During his eight year involvement at the Lodge, he experienced a lot of public involvement, which was greatly to his liking. Warren developed a keen interest in a public Information role, which in turn led to his 12 year stint on the Siskiyou National Forest as its Public Information Officer. He thrived in this role and was often seen on the local news channels dealing with the oft explosive issues as: herbicide use, river management, timber management and the spotted owl. Warren was constantly challenged with developing new ways to get public involvement on the events of the day.

In 1990, Warren retired from the US Forest Service. Not a man to remain idle, he quickly sought ways to keep busy and remain in contact with the folks he had spent most of his lifetime working with and for. Trying such things as general contractor, and then Realtor, he realized this just wasn't "doing it" for him.

Then one day while visiting his parents in Oceanside, California, his father suggested he learn to make brooms, demonstrate and teach about the craft, much as he himself had done upon his retirement. You see, back in 1971 Warren's parents, Bud and Hazel, retired and sold their home. They purchased a new car and travel trailer and set off to see their country, as all retirees dream of doing. On their journey, they visited Old Sturbridge Village in Massachusetts and "fell in love" with it. They made application and were soon put to work in the village, which is a living history museum portraying New England life in the 1790 to 1840 period. The senior Olneys worked for seven summers in the village, learning various crafts and happily sharing their knowledge with visitors to Old Sturbridge Village.

Bud Olney then built an exact replica of the 1810 broom machine and put together a program to demonstrate broom making, talk about the Village and teach early American history in southern California schools.

To make a long story short, learning to make brooms and continue in his father's footsteps seemed like a quite appealing idea. And soon, seeing his interest and ability, Bud turned his equipment over to Warren, and taught him the lore and techniques of the art of broom making.

Now, Warren continues to expand his knowledge of history and broom making. He still uses the machine his father built some twenty something years ago. He has also added a more modern electric machine which is used to make the Shaker-style brooms. When specific handles, such as branches, limbs, iron handles, canes, etc., will not fit either machine, he uses more crude tools, including his bare hands. All are made with an artistic flair and high quality.

With an open and easy "way" with people, Warren often discusses the history of broom making with the public. He particularly enjoys involving children in the broom making process. Each year he "performs" at a number of craft, antique farm equipment, schools and art shows, expanding his circle of friends and acquaintances, while demonstrating broom making and selling a variety of quality sweepers.

Why do witches ride broomsticks?

We see it every year at Halloween, the common image of a witch riding a broomstick across the night sky. But why? Where could this odd superstition have come from?
It's harder than you think to find a picture of this without a woman showing a little too much skin.
The answer is fascinating, and also a little racy.

The Pharmacology of Witches

The following discussion comes with help from the pharmacology blog Terra Sig Illata.
First of all, you have to understand that many beliefs in the supernatural throughout history were fueled by the use of drugs. What better way to make you think you can fly than tripping on some hallucinogenic? Drug use among so-called witches as part of their rituals was indeed very common:
Hallucinogenic compounds called tropane alkaloids are made by a number of plants including Atropa belladonna(deadly nightshade), Hyoscyamus niger (henbane),Mandragora officinarum (mandrake), and Datura stramonium (jimsonweed).
During the Middle Ages, parts of these plants were used to make “brews,” “oyntments,” or “witches’ salves” for witchcraft, sorcery, and other nefarious activities.
One of the obvious progressions in drug use is the discovery of how to get high faster. People who abuse pharmaceutical pills eventually figured out that you could snort them, cocaine users eventually found out that you could bypass the nose or mouth and inject the drug directly. “Witches” found a similar way to quicken the hallucinogenic high that supported their occult beliefs:
Somewhere along the line, the observation was made that the hallucinogenic compounds, hyoscine in particular, could be absorbed through sweat glands (especially in the armpit) or mucus membranes of the rectum or vagina. These routes of administration also bypassed rapid metabolism by the liver (and severe intestinal discomfort) had these extracts been taken orally.
One benefit of absorbing a hallucinogenic witch’s brew in a way that bypasses the liver is that the drug is not broken down by the liver into a less potent form of the drug. By applying the drugs in the unorthodox ways mentioned above, not only would you get high faster, but you would get higher.
The way a witch’s hallucinogenic drugs were administered to bypass the liver, more specifically via the vagina, provides a clue to why witches supposedly “ride” broomsticks. [Yep, this is going exactly where you think it is going]

Why Witches Ride Broomsticks

The earliest clue for how witches applied the hallucinogenics in these fast-absorbing areas comes from a 1324 investigation of Lady Alice Kyteler:
 In rifleing the closet of the ladie, they found a pipe of oyntment, wherewith she greased a staffe, upon which she ambled and galloped through thick and thin. 
And from the fifteenth-century records of Jordanes de Bergamo:
But the vulgar believe, and the witches confess, that on certain days or nights they anoint a staff and ride on it to the appointed place or anoint themselves under the arms and in other hairy places.
It was observed in reports like these that witches were applying drugs and hallucinogenic ointments to their private areas with a broomstick (or something similar). In the process of application, the practice could be visualized as a “riding” of a broomstick or staff.
So, in the age of “witches,” these hags found out that they could absorb their favorite hallucinogens much faster and without some side effects by applying them in ointment form to their armpits and their vaginas. And in a case of stoner ingenuity, these witches also figured out that a broomstick (or other staff) could be greased up with the hallucinogenic ointments and applied easily to their private parts. This process of applying drugs to places between their legs via broom stick or other staff is the genesis of why we imagine witches “riding” broomsticks.
This also explains why so many of the pictures of the time depict partially clothed (or naked) witches astride their broomsticks (picture here–slightly NSFW).

But why flying?

But why are witches depicted as flying on their broomsticks? It’s simple: a common function of one of the witches’ hallucinogenic of choice was to produce a sensation of flying. Witches believed that they were flying, as the drugs produced intense sensations of flying, and rumors probably spread and got contorted into the idea that witches indeed fly.
Again from Terra Sig Illata:
The tropane alkaloid hallucinogens tended to cause sleep, but with dreams that involved flying, ‘wild rides,’ and ‘frenzied dancing.’ A 1966 description of tropane alkaloid intoxication was offered by the Gustav Schenk:
My teeth were clenched, and a dizzied rage took possession of me…but I also know that I was permeated by a peculiar sense of well-being connected with the crazy sensation that my feet were growing lighter, expanding and breaking loose from my own body. Each part of my body seemed to be going off on its own, and I was seized with the fear that I was falling apart. At the same time I experienced an intoxicating sensation of flying…I soared where my hallucinations – the clouds, the lowering sky, herds of beasts, falling leaves…billowing streamers of steam and rivers of molten metal – were swirling along.

Early American Brooms
















Brooms have been used for centuries to sweep caves, cabins and castles. Before 1797, brooms in America were home and hand-made. Tree branches and brush were often used to sweep the floor and clean the ashes from the fireplaces. Sometimes a crude brooms were fashioned by tying something on a stick or handle: straw, hay, fine twigs or corn husks. These crude brooms did not sweep well and fell apart after a short time, even though strong linen twine was often used.


At this time, many people grew flax and retted the very strong fibers, spinning them into thread for fabric used in making clothes, tablecloths and napkins. (Today we call tablecloths and napkins, linens for the fiber used in their making.) Coarser fibers were spun into cordage used around the home and farm, including the making of brooms for the family’s hearth.

Cooking at this time was much different than it is today. Stoves did not exist. They had not yet been invented. Cooking was done outside, over an open fire, or in a huge fireplace in the kitchen. Reflector ovens, and pots hanging from chains, were used to prepare the meals. Wood had to be carried in for the fire, and the ashes had to be carried out. In between, the fire had to be tended to provide just the right flame, coals and heat. A big and messy job. So, a broom was an important tool in keeping the hearth area clean. Unfortunately, good brooms did not exist, and dust and ashes were a part of life.


Could you imagine the frustration of having a kitchen full of young, playing children, while trying to cook a meal in the fireplace? Dust is flying as they run around the table, playing tag. It is nearly time for your husband and the field hands to come in, hungry after a long day of plowing, planting or harvesting, and dinner is not ready. If you could get the youngsters out of the kitchen, maybe all would be ready on time, but they do not heed the oft repeated words, "Please go outside and play." Time for stronger measures–take that old, poorly made broom, and give them a swat with a stern warning to "GO OUTSIDE!" Swish goes the broom and the straw portion of the broom sails across the room. And so the phrase for anger, "Flying Off The Handle."

The sweeping quality of brooms changed in 1797 when Levi Dickenson, a farmer in Hadley, Massachusetts, made a broom for his wife, using the tassels of a variety of sorghum (Sorghum vulgere), a grain he was growing for the seeds. She thought Levi’s broom was exceptionally good and told friends and neighbors about it.


Plants are divided into families based upon their seeds, how and where they grow. Sorghum is a large family of plants (containing more than 200 varieties) some of which are high in sugar content, others low. Sugar cane and another variety (from which sorghum molasses is made) are examples of high sugar content sorghums. Millet, milo and broom corn are examples of low sugar content sorghums. In all cases, sorghums are annual plants with a single stem, ribbon-type leaves and tassels with seeds produced on them. Individual varieties grow to differing heights ranging from two to ten feet.. Tassel lengths vary from less than 6 inches in length up to over two feet. Sorghum vulgere, the variety we call broom corn, has the longest tassels. It is this variety which is used in the making of brooms.

Word of Levi’s broom spread quickly throughout the community and people asked him to make one for them. As the demand for these brooms grew, Levi grew more and more of the sorghum. Each sorghum broom he made swept well, but ultimately fell apart as all brooms of that time did . Apparently people were not disturbed by the brooms falling apart, for that was the nature of brooms.

Levi was not satisfied with having his "very" fine brooms fall apart, and envisioned a machine which would help him make better brooms, and make them faster. In 1810 the foot-treadle broom machine was invented. This clever machine played an integral part in the Industrial Revolution.

While developing the broom machine, its inventors also examined the broom handle, looking for a better way to secure the sorghum tassels to it. These inventors drilled two holes in the handle and inserted split pegs into the round holes. The broom corn was lashed onto the handle and pegs, using linen twine.


Starting in 1810, Early American Brooms had pegged handles. Broom makers had brace and bit and could drill round holes in the handles, but did not have round pegs. So they split square pegs, trying to make them just the right size to fit snugly into the drilled holes. If the pegs "came out" too small, they would not stay in the hole so the broom could be made. If the pegs were too big, they could split the handle when driven into the hole. Only the correct size would "fit in." So developed the saying, "Square peg in a round hole" for those not fitting in.


By about 1810, the sorghum used in brooms, had acquired a new name, Broom Corn, as the British called all seed bearing plants, "corn." The sorghum also looks similar to the sweet corn plant, and its tassel had become the broom material still used in quality brooms today.

Many copies of the 1810 broom machine were made, and soon many one or two man broom shops were making thousands of round brooms each year. Short handled versions were used in and around the large fireplaces used for cooking and heating homes. Long handled brooms were used to sweep the wood or dirt floors throughout the rest of the homes and in shops.

In the mid-1820's the Shakers, an industrious religious order, started making brooms, changing the design of the round broom: they eliminated the woven stems up the handle, the holes and the pegs, and used wire to bind their broom to the handle. They then put their broom in a vise, sewing it into the flat brooms we use today. While their flat broom sweeps a rough surface very well, it does not do as quick and thorough a job as the earlier round broom, on a smooth surface.

Meanwhile, back in Europe, the birch or besom broom industry, as it was called, had prospered since Saxon times in the sandy heath areas of south-east England, where the birch grows profusely. Known as Besom Squires, the craftsmen were numerous along the Surrey-Sussex border, and they employed assistants who worked individually in the coppices. The brooms were made of birch twigs attached to a handle of ash, hazel or chestnut.

By about 1830, there were enough one- or two-man broom shops in the U.S. that 60,000 brooms were being produced annually. This provided enough brooms for domestic needs and put this nation into the broom export business. Brooms were exported to Canada, South America and Europe, but not England, as their Broom Squires obtained an embargo against Yankee brooms. Ultimately these brooms were permitted into England, bring an end to the twig broom business there.

As people moved west, it was found that broomcorn grew exceptionally well in the mid-west. Small broom shops appeared in some of the "western" towns, growing broomcorn and making brooms for the settlers. The broom industry grew as tens of thousands of acres of broomcorn was grown annually. Some of these shops became factories, making hundreds of brooms a day, for a growing nation.

Our broom making equipment, technology and the use of broomcorn can now be found worldwide. Our broom industry flourished until 1994 when foreign brooms were permitted into the U.S., duty free. The remaining small factories struggle to compete with Mexican-made brooms, while individual broom makers like yours’ truly make a few thousand high quality brooms each year and tell the interesting stories of our history.